Methods for Upgrading HDD and SSD on your laptop

Your laptops require updates on their operating system, external DVD drive, and other components regularly. A DVD drive is responsible for processing the reading and writing data between the optical disks. In the past few years, the latest technology has been removing DVD drives from notebook computers. But people who continue with their older laptops are still using a DVD drive that requires timely updates to function smoothly.

Nowadays, people are gravitating towards Hard Disk Drive and Solid State Drive, and the combination of both the drives extend the storage capacity. If you are also looking for a way to swap or replace the DVD drive with an SSD or HDD, then you will have to get a few components, such as a drive caddy (before buying this, make sure that you remove your optical drive and measure the thickness), Plastic Level tool and a screwdriver

Preparing your gears beforehand will help you manage everything easily. If you are a fresher in these tasks, then follow our complete guide below to swap the drive without any fuss. We have divided the procedure into five steps, and this is where you start:

Order a Drive Caddy

HDD caddy is a special case for HDD or SSD built from aluminum. The case has a plastic frame, from where you can connect the hard drive inside your laptop. This will act as extended storage for your device. Because the RAM, Hard Disk Drive, and DVD drive use common connecter from device-to-device, it becomes easier to replace them. You can purchase a good caddy on eBay or Amazon for less than $15. Additionally, caddies are equipped with SATA connectors, so if you slot them in, the replacement drive will begin to act as additional storage for your device.

Choose an HDD/SSD

Your next step should be to choose an SSD or HDD to replace it with the optical drive. Please check that the storage of the drive meets your requirements. But, we would recommend you to use a larger capacity drive than your current requirement as you might require it in the future and it will hold all your data safely for the most extended period.

Remove the existing DVD Drive

After getting your base ready for the whole procedure, it’s time to remove the DVD drive. The removal procedures are usually easy, but the older companies used a different algorithm which might give you a hard time removing the DVD drive. But the most common method uses these steps:

1. Place a towel on your table and keep your laptop on it.
2. Your laptop should be upside down with its head facing down the towel.
3. At the center of the laptop, you will find the DVD locking screw. Remove that screw from the slot.
4. Pull the optical drive or push the removal button, depending on the model of your laptop.

Use of screwdriver to remove the DVD drive fascia from the laptop. Please keep all the parts safe as you might require them later.

Place the HDD/SSD into the Caddy

This is the most effortless procedure of all. The drive caddy that you had purchased earlier might come with a screwdriver. If not, then use your own screwdriver to tighten and secure the HDD or SSD inside the caddy. Ensure that it is used through all the parts tightly; otherwise, the caddy will not slide back on your laptop.

Insert the Caddy

Begin with the fascia you had removed earlier. Attach the fascia back by pushing the catches on to the right slot. Make sure that you don’t break the catch. But, if you have already messed up, then you may use a hot glue gun carefully to attach the parts. Then insert the drive and secure everything with screws to keep all the pieces intact.

With this, you are now ready to use your device with new storage. Use it with the latest operating system on your laptop for a better experience. This extra investment for your laptop will prove beneficial to you.

I’m Bond walker . I’m a web developer living in New york. I am a fan of technology, a publisher of guides at Business Directory design, and programming. You can read my blog with a click on the button above.

Source:- Methods for Upgrading HDD and SSD on your laptop

How to Gain Admin Rights on Windows PC

Windows 10 offers two types of accounts for its users that includes Administrator account type and Standard user account type. The Administrator account has access to all the significant features and control over the system setting, system controls, and more. While the Standard user account type has a lot of restrictions and doesn’t allow the users to install any new application, tweak settings, configure the system, etc.

The minor changes that will be made by the Standard account user will not affect the rest of the computer settings. If you are someone who is trying to explore the administrator user account and the benefits it offers, then follow the below-mentioned tips and steps. But before beginning the procedure to learn to switch to the admin account, make sure that you have the permission from your administrator if you are in the corporate sector as it might set you against the rule to go against the restrictions over the approval from the officials.

User Account Control (UAC)

The first step would be to know your rights and controls over the functions you have as a Standard account holder. You may know that Windows PCs use User Account Shields that has a blue and yellow colored protecting shield icon. It offers control enforcement facilities, and it requires an admin’s privileges. It means that the admin will provide you with permission to make any changes on the device. You can ask your admin for the password and get the UAC prompts for making settings. To make changes to your account type, ask another admin for help as they will have to follow these steps:

1. Go to PC’s Settings and click on Accounts.
2. Select family & other users.
3. Under the Other People or Your Family section, locate your account and hit the Change Account Type button.
4. Switch to Administrator.

Temporary access to an Administrator account

There is a merit of not having an Administrator account for every user. It protects your computer and prevents guest users from making any changes to your computer. However, Windows still gives you the advantage to get the admin rights by getting an Administrator account for yourself. Even if you get some of the admin rights as a Standard account user, you might face a lot of challenges. So, to get a built-in administrator account,

1. Press Windows + X key together and click on Windows PowerShell (Admin). Or enter “net user administrator/active:yes” command.
2. Then log in to your account and click on the Administrator. This wouldn’t prompt for the password, and you will be able to freely login and use any function you desire.
3. Before shutting down your computer, enter “net user administrator/active:no” command. This will ensure the safety of your device.

Tweak Admin Rights

1. For this, you will have to login as an administrator. If you are not an administrator then, go to the Settings and click on other users.
2. Click on Change Account Type option and switch to Administrator from a Standard user account.

To check all the rights, follow these steps.

1. Go to File Explorer and open This PC section.
2. It will show you the series of options of the primary storage drive, click on Devices and Drives and go to Properties.
3. A new window will open. From there, click on the Security tab.
4. Click on the Advanced button and it will show you all the changes and permissions.

Ensure that the Administrator group has Full Control over the Access. If not, click on Change Permissions from the bottom left corner of the window. Then click on the box for Full Control of the Administrator group.

The solutions mentioned above will help you overcome some of the critical hurdles that you may have to face while gaining control over the administrative rights.

I’m Bond walker . I’m a web developer living in New york. I am a fan of technology, a publisher of guides at wiredq design, and programming. You can read my blog with a click on the button above.

Source:- How to Gain Admin Rights on Windows PC